Non enhanced PPS extruded grade Color Masterbatch
Unfilled PPS masterbatch for extrusion processes. For films, fibers, and profile extrusion applications.
Our non-enhanced PPS extruded grade color masterbatch is optimized for extrusion processes including film, fiber, and profile extrusion. Provides consistent color and processing stability at high temperatures.
Product Features
- Optimized for extrusion processing
- Good melt strength
- Consistent melt viscosity
- High purity formulation
Typical Applications
Typical Physical Properties
Physical parameters source: internal testing data submitted by manufacturers for inspection. Values are typical and may vary by color and grade.
Physical Properties
| Project | Condition | Value | Unit | Test Method |
|---|---|---|---|---|
| Carrier Resin | — | PPS (Extrusion) | — | — |
| Density | 23°C | 1.34–1.38 | g/cm³ | ISO 1183 |
| Melt Flow Index | 315°C/5kg | 15–35 | g/10min | ISO 1133 |
| Pigment Loading | — | 15–40 | % | — |
Processing Conditions
| Project | Condition | Value | Unit | Test Method |
|---|---|---|---|---|
| Processing Temperature | — | 300–330 | °C | — |
| Drying Temperature | — | 130–150 | °C | — |
| Drying Time | — | 4–6 | h | — |
| Addition Ratio | — | 1–3 | % | — |
Color Performance
| Project | Condition | Value | Unit | Test Method |
|---|---|---|---|---|
| Color Fastness | Xenon lamp 500h | Grade 4–5 | — | ISO 105-B02 |
| Heat Resistance | 320°C/5min | ΔE ≤ 1.5 | — | Internal |
| Flame Retardancy | 0.4mm | V-0 | — | UL 94 |
Physical parameters source: Non national third-party testing certification submitted by manufacturers for inspection. Actual values may vary depending on specific color formulation, processing conditions, and application requirements. For detailed technical data sheets (TDS), please contact us.
