TPE Series — TPE-MB Series Inquire Now
SBS/SEBS based TPS Color Masterbatch
TPS (SBS/SEBS) based TPE masterbatch with excellent soft-touch feel and elasticity. For grips, seals, and consumer products.
Our SBS/SEBS based TPS color masterbatch provides rubber-like elasticity with excellent soft-touch feel. Ideal for grips, seals, consumer products, and overmolding applications.
Product Features
- Excellent soft-touch feel
- Good elasticity and recovery
- Easy processing
- Wide hardness range
Typical Applications
Typical Physical Properties
Physical parameters source: internal testing data submitted by manufacturers for inspection. Values are typical and may vary by color and grade.
Physical Properties
| Project | Condition | Value | Unit | Test Method |
|---|---|---|---|---|
| Carrier Resin | — | TPS (SBS/SEBS) | — | — |
| Density | 23°C | 0.88–1.05 | g/cm³ | ISO 1183 |
| Hardness Range | — | 0A–60D | Shore | ISO 868 |
| Pigment Loading | — | 20–50 | % | — |
Processing Conditions
| Project | Condition | Value | Unit | Test Method |
|---|---|---|---|---|
| Processing Temperature | — | 170–210 | °C | — |
| Drying Temperature | — | 60–80 | °C | — |
| Drying Time | — | 2 | h | — |
| Addition Ratio | — | 1–3 | % | — |
Color Performance
| Project | Condition | Value | Unit | Test Method |
|---|---|---|---|---|
| Color Fastness | Xenon lamp 200h | Grade 4 | — | ISO 105-B02 |
| Heat Resistance | 200°C/3min | ΔE ≤ 1.5 | — | Internal |
| Migration Resistance | 70°C/24h | No migration | — | Internal |
Physical parameters source: Non national third-party testing certification submitted by manufacturers for inspection. Actual values may vary depending on specific color formulation, processing conditions, and application requirements. For detailed technical data sheets (TDS), please contact us.
